When a temporary or semi permanent surface is required for areas such as walkways or car parks, a suitable solution is often only feasible if the ground is stabilised to prevent damage or poaching. This is where Ground Reinforcement Grids come into their own, protecting sensitive areas or enabling constant access.
Ground Reinforcement Grids are designed to improve water drainage and stop erosion. The tough, durable interlocking grid system is designed to provide ground reinforcement, turf protection and erosion control. Manufactured from 100% recycled plastics, sourced exclusively in the UK – material that, if not recycled, would have been destined for landfill.
This system provides an economical and environmentally sustainable alternative to asphalt or paving solutions.
Contact us today and introduce the ultimate in damage limitation to your site.
From £9.00 per square metre
An alternative to our Ground Reinforcement Grids is our Ground Protection Mats click here for more information.
Download our GeoGrids brochure HERE
| Key Benefits and Features | |
| Quick and easy to install reducing on site costs | |
| Manufactured in the UK from 100% UK waste | |
| Sustainable, 100% recyclable and environmentally friendly | |
| Aesthetic - grass or decorative gravel infill | |
| Semi or permanent ground reinforcement | |
| High strength durability yet lightweight | |
| Up to 16 tonne axle load | |
| Proven connection system | |
| Minimal maintenance | |
| Non-slip and crack proof | |
| Weatherproof, frost and UV resistant | |
| Cut to size | |
| Dimensionally stable | |
| Non expanding | |
| Surface reinforcement with natural drainage | |
| Prevents gravel migration & soil erosion | |
| Provides water dispersion and SUDS | |
| Low transport and handling costs | |
| Applications: | |
| Construction sites | |
| Green car parking areas | |
| Private lanes and access roads including emergency access | |
| Event Parking | |
| Pathways and drives | |
| Golf courses and Buggy Paths | |
| Landscapes | |
| Equestrian and livestock facilities | |
| Green roof and rooftop gardens | |
| River and road embankments | |
| Private Airfields | |
| Towpaths | |
| Embankment Stabilisation | |
| Residential Driveways | |
| Emergency Access Routes | |
| Helicopter Landing Pads | |
| Cycle Routes | |
| Outdoor Events | |
| Infiltration Basins | |
| Road Extensions and Widening | |
| Pedestrian Access Ways | |
Specification
Grid Area: 330mm x 330mm x 40mm
Wall Thickness: 4mm
Wall Depth: 40mm
Weight: 4.14kg/m2
Number of tiles per m2: 9
Load Capacity: up to 250 tonnes/m2
Axle Weight: Up to 16 tonnes
M2 per pallet: 56m2
Gross Weight per pallet: 260kg
Material: 100 recycled UV Stable Polyolefin from UK sources
Temperature Stability: -50 to + 90 Degrees C
Chemical Resistance: Sodium Chloride (rocksalt), ammonia, acid rain, petroleum products, hydrocarbons
Estimated Installation Time: 100m2 per person per hour (depending upon ground preparation)
Base Specifications: Minimum base recommended: 250mm for Car Parking and 450mm for heavier vehicles
Disclaimer:
The weight load distribution performance of Ground Reinforcement Grids is subject solely to ground conditions, weight and type of vehicle or plant. Grassform Plant Hire Ltd always recommends that a site survey be carried out to determine weight loading and ground conditions. Grassform Plant Hire Ltd, its agents or employees are not liable for any damage to existing ground or property through the use of Ground Reinforcement Grids.
Packaging
56 layers of 9 tiles = 56m2
504 pieces per pallet
Tiles are pre-connected in a one m2 sheet
Loaded pallet weight 250kg (approx)
